X-Message-Number: 24066
Date: Fri, 07 May 2004 22:00:49 -0700
From: Olaf Henny <>
Subject: Oooops!
References: <>

Here I thought, that I'd have some fun with figures in my 
previous post, and then I goofed when converting it all to 
a more tangible figure in millimeters.  It should have been 
0.0316 mm for the square conduit and 0.0357 mm I.D. for the 
round conduit, not roughly 1/3 rd mm as stated.

Rate This Message: http://www.cryonet.org/cgi-bin/rate.cgi?msg=24066